Long Sleeve Platen Insert Instructions

Below are the instructions for installing and using the Long Sleeve Platen Insert for the Touchdown Platen on the Brother GT-541® and GT-782® direct-to-garment DTG printers.


Long Sleeve Platen Insert for Brother GT-541 and GT-782 Printers


POSITION GUIDE: Installing the Long Sleeve Platen Insert

The Long Sleeve Platen Insert shall be placed going down the center of the Touchdown Platen as show in the illustrations below. The Undermount Platen Inserts need to be installed in order to hold the long sleeve in place when using rubber bands.


Long Sleeve Position Guide for Brother GT-541 & GT-782 Printers


Then using the included wing nuts, tighten one wing nut from the bottom of the T-Base on the threaded screw to keep the platen firmly in place.


ARTWORK TEMPLATE: Printing with the Long Sleeve Platen Insert

You will want to use the Long Sleeve artwork templates provide to print from as shown below and use the standard 14" x 16" platen selection in the Brother® GT print driver.


Long Sleeve Touchdown Platen Artwork Template for Brother GT-541 and GT-782 Printers


PRINTING NOTE: Remember that what is on the computer screen is actually flipped around and upside down. So depending on what you are putting on the platen and how you are printing on it, you may need to adjust the orientation of the artwork.


To download the artwork templates, complete the form below with a valid email address and click the Submit button. An email will be sent to you with a hyperlink that is valid for 72 hours. After clicking on the link, save the zip file to your computer. Unzip the file and you will see the different artwork templates available.


Your name:
Email address:
ZIP / Post code:


VIDEO: Installing the Long Sleeve Platen Insert




For the instructions on the other platen inserts, click on the appropriate link below.


Youth Platen | Baby Platen | Collar Platen | Large Rectangle Platen | Small Rectangle Platen | Long Sleeve Platen
Zipper Platen | Small Polo Insert Platen | Large Polo Insert Platen | Full Platen | 1 Square Platen | 2 Squares Platens
Wrap Around Platen Insert


LEGAL NOTE: The use of Brother®, GT-541® and GT-782® marks are for identification purposes only. No rights are claimed to them and they are only used for identification purposes only. For additional information on these direct-to-garment printers, click here.